DESCRIPTION
The Model 560H Dc Differential Amplifier provides amplification
and/or buffering for low and high-level signal sources. The
Model 560H is directly interchangeable with the Model 563H
Transducer Conditioning Amplifier and utilizes the same enclosures.
Gain is front-panel selectable from 0.01 to 25 or 1 to 2500
in 10 calibrated gain steps in a 1, 2, 5 sequence plus a 2.5
gain vernier. Selection of gain range is by a board-mounted
100:1 input divider switch. Front panel controls include both
RTI and RTO zero with the RTO zero range board-mounted switch
selectable at ±10 V, ±1 V, or ±100 mV.
Amplifier output monitor jacks and LED display of input offset
is also provided.
The amplifier bandwidth is dc to 200 kHz and
an optional two pole Bessel filter with front-panel selectable
frequency cut-offs
of 10 Hz, 100 Hz, 1 kHz, 10 kHz, and a wideband position permit
user selection of lower bandwidth.
The standard output is ±10 V
at 10 mA with optional capability to 100 mA. Dual output
is provided with the filter option.
This low noise, low drift amplifier features input
impedance of 50 MΩ, common mode rejection of 110 dB with
up to 300 V common mode voltage capability.
The Model 560H was designed to accurately process low-level signals in electrically
noisy environments by providing excellent common mode and normal mode noise rejection
and RFI / EMI immunity.
ENCLOSURES
Available enclosures include a two unit portable bench mount,
a six unit portable bench mount, and a sixteen unit standard
19-inch rack mount.
 
Model E513-2A Enclosure with 563HNs (front and rear view)
 
Model E513-6A with Model 563HLs (front and rear view)
 
Model R513-16 Enclosure with 563HNs (front and rear view)
|
