 |
| |
LEGACY PRODUCTS
Legacy products have limited availability. Please contact your local
sales representative or the factory for a quote on model availability,
lead-time, non-recurring engineering (NRE) costs, if applicable, and
price. Most legacy products have replacement items in the line-up
that are comparable or superior in performance criteria.
|
|
|
|
| |
MODEL 414
Ruggedized Conditioner-Amplifier
The Model 414 is a true differential amplifier with transformer
isolation between input, output and the power source. An
internal dc / dc converter provides bi-polar voltages for
the circuitry while accepting power from a single external
dc power supply or battery. This is 12 volts for automotive
applications or 28 volts for airborne systems...
MODEL 414
|
|
|
|
| |
MODEL T414
Ruggedized Thermocouple Conditioner-Amplifier
The Model T414 is a thermocouple conditioner-amplifier for
use in poor environmental conditions. It provides outstanding
performance despite temperature extremes and high levels
of shock and vibration...
MODEL T414
|
|
|
|
| |
MODEL 418
Differential Dc Amplifier and Signal Conditioner
The auto industry standard for on-board vehicle test, the
Model 418 is small and rugged but is able to condition and
amplify the signals from almost any bridge type transducer
including strain gages, load cells, and RTDs. On the test
tracks, the Model 418 can produce high accuracy data despite
temperature extremes and high shock and vibration conditions...
MODEL 418
|
|
|
|
| |
MODEL T418
Thermocouple Conditioner-Amplifier
This unit is physically identical to the general purpose
Model 418 except that the vernier in-out switch is replaced
with a switch which turns the internal reference junction
circuits on and off...
MODEL T418
|
|
|
|
| |
MODEL 540
Multichannel Conditioner Amplifier
(Shown in R540-2 Enclosure) The Model 540 is a plug-in card
incorporating four independent differential dc amplifiers.
Typically used as the front end
of multi-channel data acquisition systems, these amplifiers
offer excellent stability and accuracy. Bridge completion
terminals and single-step remotely-controlled calibration
are available options...
MODEL 540
|
|
|
|
| |
MODEL 755
Enhanced Transducer Conditioner Amplifier
The Model 755 is a transducer conditioner and differential
dc amplifier that offers outstanding performance; it also
provides automatic zeroing of an off zero input upon local
or remote command. Because of its extremely high isolation,
the autozero feature produces a precise output zero without
adding noise or loading effects to...
MODEL 755
|
|
|
|
| |
MODEL 1100CF
Thermocouple Simulator-Calibrator
The Model 1100CF can simulate the output of E, J, K and
T type thermocouples. Temperature, polarity and a linear
voltage mode are controlled by use of thumbwheel switches...
MODEL 1100CF
|
|
|
|
| |
MODEL 1120
Thermocouple Simulator-Calibrator
The microprocessor-based Model 1120 utilizes polynomial transformation
to convert temperature into an exact equivalent thermocouple
emf. As a result, conformity errors are virtually nil. Ten
thermocouple types are offered as plug-in modules, covering
all commonly used materials...
MODEL 1120
|
|
|
|
| |
RELATED ITEMS
|
|
DOWNLOADS
REQUEST QUOTE
|
|
|
|
|
